Sheet metal processing

CNC press
brake bending

Precision bending on CNC hydraulic press brakes for complex profiles in steel, stainless steel, aluminium, brass and copper: accurate angles and repeatable results across small series and recurring batches.

We work from your technical documentation and review the bending sequence before every production run.

Request a quote See our technical capacity

Key figures

The right capacity for your project

3,000 mm

Bending length

Bending capacity for wide sheets and long profiles, with even pressure along the full length.

130 t

Press force

Two identical TRUMPF TruBend 5130 press brakes, 130 t each, for parallel production and continuity.

up to ±0.5°

Angle accuracy

CNC control delivers repeatable results on every part. The achievable tolerance depends on material and thickness and is confirmed during the documentation review.

Materials processed Maximum thicknesses apply to shorter bending lengths; across the full 3 m length, the maximum thickness is lower. Feasibility is confirmed after reviewing your documentation.

Steel Max. thickness 8 mm

Stainless steel Max. thickness 6 mm

Aluminium Max. thickness 8 mm

Brass Max. thickness 5 mm

Copper Max. thickness 4 mm

Build-to-print

Bent profiles made to your documentation

We work from your technical drawings and project specifications, with the angles, bend radii and dimensions you require.

Before production, we review the bending sequence, tool-to-part collisions and material springback, from single-bend parts to profiles with flanges, boxes and closed geometries.

From a single part to repeat orders

Prototypes and one-off parts Pilot batches Small series Recurring batches OEM components

Operator at the TRUMPF TruBend 5130 press brake

Setting up bending tools on the press brake

Production technology

Press brake bending equipment

TRUMPF TruBend

2 × TRUMPF TruBend 5130

Force 130 t

Bending length 3,000 mm

Angle accuracy up to ±0.5°

Control CNC

The TRUMPF 5000 series is the benchmark for series production, holding the same angle from the first part to the last.

Multi-axis CNC backgauge Deflection compensation along the full length Interchangeable tooling for different radii Two identical machines for double capacity

From file to finished part

A clear process for every order

Send your project

Tell us the material, thickness, bend angles and quantity required.

We review the documentation

We check the bending sequence, radii, collisions and profile feasibility.

You receive a quote

We set out the cost, production lead time and terms for your project.

We start production

We schedule the machine and begin manufacturing once the details are approved.

We inspect the parts

We check angles and dimensions, then prepare the parts for delivery or the next stage.

We produce U, L, Z and C profiles, boxes and multi-bend profiles, working from your technical documentation.

The minimum radius depends on the material and thickness. As a general rule, the inside radius equals the sheet thickness, with exact feasibility confirmed after reviewing your documentation.

Yes. We handle one-off parts and prototypes as well as small series and repeat orders.

Yes. We can take your project from laser cutting through bending and finishing, all at the same site.

We mainly work with uncoated sheet. Bending material with an applied finish (paint or protective film) can mark the surface along the bend, so we assess each case individually.

On our TRUMPF TruBend 5130 press brakes, we work to angle tolerances of up to ±0.5°, with springback compensation for each material. The achievable tolerance depends on material, thickness and geometry, and tighter requirements are agreed before production starts.

We accept .dwg and .pdf files for review and quotation. For other formats, send us a download link.

We treat all documentation and commercial information as confidential. On request, we can sign an NDA before you send your files.

Certified management systems